Event created by admin (Simon W)
Due to the success of the last Bore Chasers event, there will be a limit of 130 pilots for this one. If you want a place then YOU MUST RSVP please.
As a well known 80's artist once said, "if your names not down, your not coming in" 
If you have not been to this one before, I am sure that all who have will agree that it's not one to be missed!
The location of the take off field is just perfect for following the tides that will be passing though over the weekend.
We will have the amazing Platinum Bar's team back to take care of drinks.
For food, we can cater for ALL. (a vegan menu) and some amazing sounding additions to the norm (as well as the norm of course)
Camping for Tents, caravans and motorhomes is FREE.
Limited family / holiday accommodation is available walking distance from the flying field. (ideal for those who would like a bit of luxury) Please contact Kathy Turner on 07970 771 039 for information, availability and pricing.
As always, FULL MEMBERS ENTRY IS FREE.
Non Paid members, £25 Please pay on arrival
Guests non flying, £10 Please pay on arrival.
The address is:
Milton End Farm, Arlingham, Gloucestershire, GL2 7JH.
Here is a short video from a past event
Also, check out the full article from the last Bore Chasers event link below.
User Feedback
There are no reviews to display.
-
Posts
-
By Anthony Stark · Posted
Hello guys & girls, I’m looking into getting involved with Paramotoring, I’m based near Southampton and I would like some help on where to get training and wheee to start please. I thank you for your time and support kindest regards, Anthony -
By admin (Simon W) · Posted
I have asked Rob the Farmer / pilot to have a look SW -
Hi can now remember leaving it by the hedge ,could still be there as it was later on Sunday morning when I had my last flight,would love to get it back. Geoffw -
Hi just hope that someone has found a ozone wing bag at the Banbury pmc flyin . Just when for it and I quickly realised I had left it behind at the pmc meeting,anyone who found it .please let me know, Many thanks Geoffw.
-
By aviatorkev · Posted
After an engine out I cleaned the carb of a tiny amount of varnish like muck. Next flight was ok but the following one engine stopped again. I replaced carb gaskets, diaphragms, needle valve and internal filter also fuel lines and inline filter. Pop off was 19 and reset at 10psi. I pressurise the fuel tank by blowing a couple of times into the tank breather tube and prime by pressing button on carb but sometimes the fuel has just reached the carb as normal BUT not filled the carb! I can remove the Diaphragm cover and diaphragm, press the metering lever to open the needle valve and no air or fuel comes out! When I disconnect the fuel pipe to the carb and reconnect it, then priming occurs as normal. Any suggestions as to possible causes or solutions would be very welcome thank you.
-
