Jump to content

nigel_d.

PMC Full Members
  • Posts

    403
  • Joined

  • Last visited

Posts posted by nigel_d.

  1. The foot stirrup works well but is "messy", I found that it starts easy with even a left handed pull when it is warm. However a certain technique is requiered namely to find the compression and pull with a sort of arm flicking action rather than a firm pull if you get my meaning, think of trying to pull a tablecloth from underneath crockery. One other thing is the pulley, the bearing seems to wear causing some friction. I spent a 12 quid at a sailing shop for a high quality, ball bearing one, I believe this helps a lot.

  2. Hey Mat, I have had a mxl for 6 years and just last week bought a pap top80 1400, what a difference! I weigh 82 kilos and though launches were reliable it sort of only just got off. Now the launches are much easier. The big difference is quietness and less vibration and what a joy when idling during descent, as I,m sure you have found. Think I might have to try a reflex wing now.

    Nige

  3. How about testing each lower line by stressing it to about say 35% its breaking strain and see what happens, you may find that 1 or 2 snap at as little as 20 %. I had an old wing once and decided to re-stretch the lines in case they had shrunk. One of the stabilo lines snapped with a petite 11 year old girl pulling at the other end. Dont know what the tension was but my guess was that it was around 10% of breaking strain. Then try porosity test by trying to breath air through the upper leading edge nylon. Finally get someone to hold the material taught and try to poke your thumb through it. I believe these tests would highlight the most common ageing problems.

    Flame on!

×
×
  • Create New...