Jump to content

miniwing2

Members
 View Profile  See their activity

  • Posts

    184

  • Joined

  • Last visited

 Content Type 

Everything posted by miniwing2

  1. miniwing2
    Yea as you said the tide was well out at five oclock last night but was very boggy and no one was flying so anyone thinking of going out there thinking they are going to fly at low tide ay gona happen .check tide hights first .cheers on that Paul,cant wait to catch up with a few of the lads ,looks a good place to practice winging it .B&B reserch about to commence.
  2. miniwing2
    Anybody thinking of ppg off Formby or Heysham beach tomorrow,i have checked NOTAMS would rather meet up with regular flyer for a final brief to what should be a smooth days flying, and maybe the root onto the beach and takeoff area.
  3. miniwing2
    Yes Ptwizz and i am shure morgy was as well.I do try to draw the best out of people and it,s the only way i know how happy landings guy,s
  4. miniwing2
    sounds bit complex Morgy,will get all the bits then hopefully it should all make sence. think i will start by googling wot a keyring is.oh why was i born soooo ducking thick .
  5. miniwing2
    looking for mirror for my trike anyone no of a mirror that works well on theres
  6. miniwing2
    there used to be a guy fly doodlebug from fairbourn just accros from barmouth harbour. but futher up the coast through harlech blackrock sands have always got a few microlights and paramotors hacking up and down the beach.
  7. miniwing2
    BRILLIANT fifteen wings sixteen pilots LOL.
  8. miniwing2
    I can,t rule it out Pete will take it apart again ,i always strain the and keep things spotless,it,s easy to live in denial cheer,s pete
  9. miniwing2
    HA HA HA pair on order from russia LOL.
  10. miniwing2
    Ay up sy long time no speak. It,s a tillotson carb diaphram type,wasnt awear of any hole normaly it works fine and flows through the needle valve ok.it just wont push juice through to the suction port it just wont squeeze short of getting mole grips on it
  11. miniwing2
    dose anyone know why the primer bulb goes solid and won,t squeeze,had this problem before and always sorted it not knowing what the cause is.and it allway,s s eems to happen when i am kitted up and ready to effin fly
  12. miniwing2
    now i am going to say what i think,and i no i am going to get shot down.I think that under the false looking skin is a full bungie jump harness and the join is cleverly hidden behind the tattoo around his neck .on the previous vid where the guy was seen inserting the bolts puncturing the flesh,wet suit to locate the spacers full of tomato sauce .either way he,s got balls
  13. miniwing2
    looking at my BMI it would rip out the second the hankchief opened .who,s done the calculations on that
  14. miniwing2
    engine hard to pull,and you know it,s not flooded,check the belt tension a slack belt incorrectly adjusted can cause kick back as the propellor is part of the flywheel function this may also be the reason you are not getting max rpm,but most of us new dat anyway
  15. miniwing2
    engine hard to pull,and you know it,s not flooded,check the belt tension a slack belt incorrectly adjusted can cause kick back as the propellor is part of the flywheel function this may also be the reason you are not getting max rpm,but most of us new dat anyway
  16. miniwing2
    cheers guys.the point i was trying to make is it stated in a rightup that 30 to 1 be used after run in why would anyone write that ?
  17. miniwing2
    simple pay the full whac or say sorry to simon in public
  18. miniwing2
    Me has read some where solo 210 run in at 25 to 1 after three hours 30 to 1 wish i had saved it now.i recently had mine apart to clean the decompression port out which wasn,t blocked and found the engine to be generaly very sticky,using castrol power 1 racing oil .just wondered weather anyone else thought the same
  19. miniwing2
    Yea cheer,s Alan it,s helped allot.I had the head off a few months ago thinking i might have a leak,and put it back on at 15/ft pounds which seemed quite a lot and made a gasket out of kitchen foil which has worked ok .it,s got to come off again because the decompression drilling is blocked regards Dave Hines
  20. miniwing2
    anyone no the tourque settings for the cylinder head on the solo 210 engine. It,s quicker to ask though i,m shure there is a youtube clip somwhere.the last time i look it off i tightened it down to 15 ft pounds i think that is to much.
  21. miniwing2
    cheer,s on that col,you were right let,s hope that is all it is cheer,s
  22. miniwing2
    the decompesion valve is stickin on solo 210 making it almost impossible to pull.was thinking of filling the engine full of WD,has anyone had and managed to sort a simalar problem, :
  23. miniwing2
    outcast thank,s for the thred,looking at that lot maybe i never had a manual to lose.anyway bushtucker westmore has answered my question thank,s
  24. miniwing2
    cheer,s dude that makes sence
  25. miniwing2
    Hi pete apco force and lost the manual.if i have no luck will contact paul haxby,i think he is an apco guy.Iwas looking for a quick now answer cheer,s mate
×
×
  • Create New...