Quentin Brendemuhl Posted April 16, 2020 Share Posted April 16, 2020 Hi y'all I know some people may frown at this, but I'm going to build my own frame. I want to base it off the Maverick. My question is, is there anyone out there that would measure their frame and tell me the outside dimensions of the two different sized titanium tubes that the Maverick is constructed of? Quentin Link to comment Share on other sites More sharing options...
AndyB Posted April 16, 2020 Share Posted April 16, 2020 You also need the wall thickness as there are many different gauges of tube. Link to comment Share on other sites More sharing options...
Quentin Brendemuhl Posted April 16, 2020 Author Share Posted April 16, 2020 True. Anyone have a clippers handy? But if I decide to go with AHSS steel with 3/4in outside diameter...where I'm getting it only has one choice for wall thickness, .065". So I'm kinda stuck either way. Link to comment Share on other sites More sharing options...
Quentin Brendemuhl Posted April 17, 2020 Author Share Posted April 17, 2020 Also if someone could answer this too: When the propeller is in the vertical position, are the tips equal distance from the outer ring? It almost looks like from the way the engine mounts look, that the engine is tilted forward. Towards the top of the net. Link to comment Share on other sites More sharing options...
AndyB Posted April 17, 2020 Share Posted April 17, 2020 I recently bought Ti tube from Ti-shop.com and they have lots of wall thickness choice. https://www.ti-shop.com/catalog/category/view/s/titanium-grade-2-tubes/id/227/ Link to comment Share on other sites More sharing options...
Quentin Brendemuhl Posted April 17, 2020 Author Share Posted April 17, 2020 There's a huge difference in grades of Ti too (grade 2, grade 9). And there's really no way to know that. So at the end of the day I'm just going to be picking one out the hat. But it would be nice if someone could give me the outside diameter, as that be a good starting point. Link to comment Share on other sites More sharing options...
Recommended Posts