RickH
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Paramotor Shop
Downloads
Blogs
Events
Posts posted by RickH
-
-
I fly from sea level, what size and brand prop you using? I am running the supplied Helix 130cm carbon prop.
-
I measured my new ( 35hrs ) Atom80 with 130cm prop as having 44kg of thrust, well less than the 55kg claimed. my engine is only pulling 9500rpm, not 9800rpm so that may affect max thrust?
-
I have a PAP Tinox Atom80 with MY20 engine. Advertised thrust with 130cm prop is 55kgs @ 9800RPM. I've measured mine at 44kg @ 9500RPM.
Has anyone measured the thrust on their Atom80?
35hrs on my motor, correct run in procedure, correct fuel/oil mix 66:1 ( 1.5% ). My engine has registered a max RPM of 9530 so far, ( not getting max 9800 ).
I can't imagine 300RPM making a great difference in thrust ( 9800 instead of 9530 )
The supplied instruction manual was last updated September 2018, it does not have any information re: the new carb with high speed tuning jet.
I fly from sea level, is it possible the high speed jet needs adjusting from factory setting?
PAP PA125 relocate pull start (kick to overhead)
in Paramotors.
Posted
yep it's easy I have done it. Drilled a hole through the frame upright and added a "Pip Pin" to secure the pulley