BlackAngels_H
-
Posts
4 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Gallery
Paramotor Shop
Downloads
Blogs
Events
Posts posted by BlackAngels_H
-
-
Hi, I have an Icom 40S that needs a few more channels programmed into it. I have Windows 7 32 bit installed and no RS 232 ports fitted only Usb ports, I also have DosBox installed as the program EX2118 #2 requires Dos to run. Here is my problem, I get ( Err: Cannot access RS232c port) I have tried various drivers and emulators to connect with the radio via Icoms genuine OPC-478UC (I used this as I have a Icom 41W,worth a shot!)cabling and associated drivers even though the correct cable is the OPC-478 which is a RS232 serial cable. Your help would be appreciated.
-
Great ! looking forward to your replies.
-
Hi Guys, I cant' seem to find a lot of info on the net about this problem but have noticed on a Icom 40 GX and a Icom 40s that when I press the PTT switch the person with the receiving radio can hear the carrier signal engaging but not the spoken words. I have tried two different helmet/headsets and the two icoms and a FDC-890,all are uhf CB. Anyone with ideas?
Icom,FDC Radio Microphone Problem
in Paramotor Radio / Comms
Posted
G"Day Alan!
I have a Loescher LUH-1 comms setup and LH-S001 adapter lead, and for the FDC-890 the LH-K001 adapter lead setup. Thanks