gazgrace
-
Posts
44 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Paramotor Shop
Downloads
Blogs
Events
Posts posted by gazgrace
-
-
well i think i have figured it out . its a 3:1 reduction drive. but can any one tell me where i can get a 130cm prop for the raket for that reduction drive .. thanks .
-
once I figure out it's rpm and changing the prop where sell them ? and if it's over or under pitched how would I figure out when I go to buy one to get the right pitch . I don't know much about pitch and how they do that may be the lad I know does as he's been flying for some yrs now .
-
some one I know is going to check the rpm to see if it's right . so you think it may be the prop ?
Thanks
-
hi all a little update . I took the raket home build out today for it's first flight . well it did fly a little , There did not seem like there was enough power . I don't know yet what to do it should of got me up better than what it did . So could a different prop make that difference and where would I get a 130 prop from for the raket ?. not sure if I have the right reduction drive ratio . some pics of my paramotor on forum if any onecan tell from them.Or to get a tuned exhaust . any opinions what to do . ?
Thanks
-
HI im looking for a paramotor wing or a paraglider wing .
if possible could i get one for around 600 ?
I want a safe slow wing
im around 130kg all up with paramotor fuel ect
is it possible to get a good one for that price range ?
and what should i go for and where to look?
I have an airwave logic dhv 1 that i got used off my pg instructor but its all up weight is 95kg and not for paramotoring.
Thanks
Gaz
-
it is a little homemade well a frame I got called a areodeck . I know the apco fits it ok what size is it and how much you looking for
thanks
Gaz
-
with out the paramotor just looking for a harness .
but hard to find unless going for a new one .
-
Hi i have been looking for a paramotor harness a used one but why are they so hard to come by ? wings and every thing else secondhand are every where but harnesses.
i dont really want to buy a new one as im on a budget but what would be the cheaper one to go for thats ok ?
I have been looking at the high-fly harness with reserve pocket - any good ?
Thanks
-
I can't add a wanted item to that section of the site and I have done before ? or is it you now have to be a paying member ? thanks
-
hi does any one have a medium paramotor harness forsale .
Thanks
Gaz
-
thanks but I think I have sorted one that fits
-
yeah lol i did not notice she came out .. but she would not get past theres a wall either side its really narrow my cage was about touching each wall... moving soon bigger garden for me to move in
I will get a vid when i try it out ..
-
HI Jock . I have got a few little things to sort like fuel tank and battery . My tanks to big so got to try and find some thing that fits . And a battery holder . I started it up and gave it a little rev , it sure has got some power ,, feels it to me .
I need to get a harness next then thats about it i think . so soon as i got that i will give her a go lol
i have got a pg harness but doubt that will go on . shame
-
-
Let us know what its like ect . if they ok i might get rid of the one i have got and get one
-
they use the low fixation system 725 euros with harness 565 euros with out and its 95 euro postage to uk .. I was looking and thats what they emailed me back
http://www.airkit.blogspot.com/ some vids on there too of it
-
got one from car shop nr me , all wired up works a treat .
Thanks for all your help .
-
Boom its all just sunk in ..... about time i know lol ..
I need the relay then, where is the best place to get them from .
-
wired it all up as it should be ,But the starter motor seems like it has not got enough power . But i have started it with the battery on 2 seperate switches for starter and kill switch and it works fine . Could it be the wires in the throttle are not thick enough to carry the power as the ones i wired seperate are thicker . It does say in the manual for the engine they should be 4mm min . If it is the throttle i have where could i get a throttle with the thicker wires to carry the power through . I got this throttle with my frame i bought ..
-
Hi i have a throttle with the kill switch and the starter button .
there are only 3 wires . both positves are earthed through the one earth wire . how do i wire these to work .
Any one ?? my head hurts !!
-
hey that's a good idea there's loads of tht on site where I work .I might borrow some
-
i agree but as i have it , i may aswell use it but next will be metal for sure !!
-
i was looking at getting one . was looking at this . dont know if there ideal , was just looking
-
ive got one recently . fibre glass body . Im new to them all but i dont think it would last long if you had a bit of an accident , but it easy to repair with it being fibre glass .
I think i would rather have a one made of alloy but i got it now so will get my raket engine in and see what its like but this engine wont go in i have got to add bits ect to make it fit .
if you lived close you could of looked at mine see what you think for yourself .
i do have a load of pics though if you wanted me to post em
1 more thing , the hoop is only attached to the body with tie wraps .. me personally i dnt like that idea i like things solid . so i will be adding some kind of bolt structure in certain places to hold it so i know its not going to move ....
Fibreglass is ment to be very strong and is used on some cars i just think some little mods could make it better
I have the areodeck one but i dont knw if there is much diffrence
Transponder
in Paramotor Radio / Comms
Posted · Edited by gazgrace
Do you rate the Skyecho 2 ? they a good bit of kit