Jump to content

Brake Lines - What to do with the extra line?


Recommended Posts

My new Dudek synth. I realised, by reading the manual, that the brake lines on my synth were set for a high hang point harness. I use a low hangpoint on my motor and training harness. So I’ve shorten the lines to the marks on them and removed them from the lower pully but I’m now left with about 4 inches of spare line. What do I do with the spare. Do I just cut it off or do you tie it up somewhere?

Darrel

Link to comment
Share on other sites

My new Dudek synth. I realised, by reading the manual, that the brake lines on my synth were set for a high hang point harness. I use a low hangpoint on my motor and training harness. So I’ve shorten the lines to the marks on them and removed them from the lower pully but I’m now left with about 4 inches of spare line. What do I do with the spare. Do I just cut it off or do you tie it up somewhere?

Darrel

Have a look at the last video. I just tie a typical shoelace knot repetitively and it works well. I hate to cut any line.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...