Jump to content

Sup air harness mod


gazza_c
 Share

Recommended Posts

Has anyone done the mod on these harness's to allow for the easier speed bar application where you sew the pulleys on just at the point where the hip movement starts on the sides, as opposed to where they are standard(at the front) I find this hard to engage on my ros that uses the weight shift bars! I fly the reaction and am looking at re-positioning the pulleys

Link to comment
Share on other sites

I very well know the problem you are having with the speed bar ...on your Pap

My old one had this very same problem ...as it would because its the same as yours :? my new one has the pullys at the back of the seat and the difference is amazing ....so easy to press the speed bar now where as before when I applied the speed bar I would end up letting the throttle off leaning backwards pushing with all my might to get the bar to move then once in position (fully extended) sit back up and apply the power again

it was not the most easy of process and as a result tended to fly with out a speedbar most of the time..... :cry:

I have seen a mod where a pully has been attatched to the frame itself near the bottom with a length of line/lanyard so that it sits on the outside of the harness but it (the pully)

position is at exactly in the same as on the new harness (but on the outside) apparently the Guy who had done this mod reckoned it worked just as good and reduced the effort req to push the speedbar.... :D

Link to comment
Share on other sites

I very well know the problem you are having with the speed bar ...on your Pap

My old one had this very same problem ...as it would because its the same as yours :? my new one has the pullys at the back of the seat and the difference is amazing ....so easy to press the speed bar now where as before when I applied the speed bar I would end up letting the throttle off leaning backwards pushing with all my might to get the bar to move then once in position (fully extended) sit back up and apply the power again

it was not the most easy of process and as a result tended to fly with out a speedbar most of the time..... :cry:

I have seen a mod where a pully has been attatched to the frame itself near the bottom with a length of line/lanyard so that it sits on the outside of the harness but it (the pully)

position is at exactly in the same as on the new harness (but on the outside) apparently the Guy who had done this mod reckoned it worked just as good and reduced the effort req to push the speedbar.... :D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...