aebagwell Posted July 2, 2010 Share Posted July 2, 2010 Does anybody know what model starter goes on a solo 210? The unit is an Adventure F3. The one that it came with came off during flight. I wonder if that is why they call them "adventure" paramotors. Quote Link to comment Share on other sites More sharing options...
Richard1910 Posted July 3, 2010 Share Posted July 3, 2010 Hi, I fly a Solo 210 and as far as I'm aware the starters are all the same model. Richard X Quote Link to comment Share on other sites More sharing options...
alan_k Posted July 3, 2010 Share Posted July 3, 2010 It sounds like you're pre-flight wasn't thorough enough Did you suffer prop damage Cheers, Alan _____________________ Dudek ReActionTST 29 Fresh Breeze Airboss (Solo) Quote Link to comment Share on other sites More sharing options...
aebagwell Posted July 3, 2010 Author Share Posted July 3, 2010 There are a couple models listed on the adventure web site, I guess I'll pick the one that best matches what was on there. Preflight was good. I knew that the back bracket was broken when I bought it. but I figured that the front bracket would break only during the start torque. I figured wrong. 30 minutes into the flight it went through the prop and I learned to treat the paramotor as serious as my airplane. The concept works though. Motor conks out and you glide back to the drawing board. It an expensive drawing board though. Quote Link to comment Share on other sites More sharing options...
coggie49 Posted July 3, 2010 Share Posted July 3, 2010 There are a couple models listed on the adventure web site, I guess I'll pick the one that best matches what was on there. Preflight was good. I knew that the back bracket was broken when I bought it. but I figured that the front bracket would break only during the start torque. I figured wrong. 30 minutes into the flight it went through the prop and I learned to treat the paramotor as serious as my airplane. The concept works though. Motor conks out and you glide back to the drawing board. It an expensive drawing board though. We have all been there and learn in the end, one way or the other. You take free advice or pay to gain experience, and believe me, I've paid my share over the years. Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.