Torchy Posted May 2, 2019 Share Posted May 2, 2019 (edited) Hi I'm wondering if anyone could help me identify make and model of a paramotor? Any help would be greatfully received. Edited May 2, 2019 by Torchy Added another picture Quote Link to comment Share on other sites More sharing options...
cas_whitmore Posted May 3, 2019 Share Posted May 3, 2019 Looks like ‘ solo 210 ? Cas . 1 Quote Link to comment Share on other sites More sharing options...
admin (Simon W) Posted May 3, 2019 Share Posted May 3, 2019 yep, I would go with the Solo 210 (but only 70% sure of that) SW Quote Link to comment Share on other sites More sharing options...
Torchy Posted May 3, 2019 Author Share Posted May 3, 2019 Thanks guys I thought it was but got thrown a bit by the head. Theres no decompression hole in it and I'm having problems pull starting it. Any suggestions? Quote Link to comment Share on other sites More sharing options...
cas_whitmore Posted May 3, 2019 Share Posted May 3, 2019 Never had a solo , might have a blocked comp’ bye pass hole above exhaust port , lots of motors have this system . Hole is about 3 or 4 mm dia’’ Quote Link to comment Share on other sites More sharing options...
kiwi k Posted May 3, 2019 Share Posted May 3, 2019 10 hours ago, Torchy said: Theres no decompression hole in it and I'm having problems pull starting it. Any suggestions? If you look at Dan's video at about 9.53 in you'll see decomp hole But before pulling the engine apart as it looks like it's not done many hours i'd check the timing to see exactly at what stage it's sparking. 1 Quote Link to comment Share on other sites More sharing options...
Torchy Posted May 3, 2019 Author Share Posted May 3, 2019 Yep I've still not got a decompression hole Quote Link to comment Share on other sites More sharing options...
cas_whitmore Posted May 3, 2019 Share Posted May 3, 2019 Odd ‘ I’ve fitted a button de comp’ chainsaw type to a cylinder head in the past ‘ last resort thing but work fine ‘ Quote Link to comment Share on other sites More sharing options...
Torchy Posted May 3, 2019 Author Share Posted May 3, 2019 Hi cas I think the head has been replaced as it looks very clean inside. When I got the motor there was a decompression valve in a bag. But this head hasn't even got the port to fit that to. I'm wondering if the head is for an engine fitted with a starter motor. Quote Link to comment Share on other sites More sharing options...
cas_whitmore Posted May 4, 2019 Share Posted May 4, 2019 Maybe find a engineer friend to fit decomp to the head ‘ Quote Link to comment Share on other sites More sharing options...
Torchy Posted May 4, 2019 Author Share Posted May 4, 2019 I'll give that a go thanks for advice Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.