mark_t
-
Posts
81 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Paramotor Shop
Downloads
Blogs
Events
Everything posted by mark_t
-
Is it for the Vittorazi Evo 100 ? If so Cilve Bunce may have them on stock (Bulldog Paramotors) Cheers Mark
-
So what do we think of this little number. ??
mark_t replied to a topic in General paramotor discussion
160 cc mark -
Same weekend as the British Open Paramotor Championship
-
Hope some others can learn from my mistake !!
mark_t replied to clivefreeman's topic in Safety Matters
Think I will look into getting an Agama for the beach runs I do. I would not want to get pulled out to sea with out one should a water landing happen. Good to see you are OK and it did the job it was made for. -
It's the farm for me.
-
Im heading south looks like fun
-
Hi all just afew typing errors ! The event is at (The Hull Aero Club )and not the hull area club. The web site is ( Parafly.co.uk ) and not .com C u there Mark T
-
Hi craigthompson I have a Rad Arrow with a three part collapsable cage and two 1.2 carbon props . There are two photos in my album to have a look at . I have had it for two and a half years but I don't know how old it is . The harness still looks brand new. I have only flown it for a few hours as I have two other motors. Priced to sell £1100.00 Mark.
-
A little Flight over Conwy
mark_t replied to macey2kk's topic in Paramotoring Videos & Aerial photography
4 months with no flying I need some I need some of that -
spot the ballons at 1.19
-
Hi all I fly a Fusion 26 and a Flymecc carbon pro whitch has a sky 100 cc motor and a 3 blade prop in it ,my all up weight is 120kg with out fule . I manage to clime to 9115ft but started to notice the clime rate fall of at 7000ft. Next time I will make it to 10,000ft. Have fun and rap up warm . Mark .
-
and me ,it's a bit flat where i fly mark
-
[youtubevideo][/youtubevideo] hope this works for you mark
-
The devil is at work don't fly on these dates As for the birthday thing thats wierd FLY SAFE mark
-
jason has offerd us to fly a new site in Cottingham Hull can we do both
-
Hi jasonkennedy maplins do a push to connect button which cost about £1 40 what you have to do is undo the nut in the throttle handle pull the old switch out ,re solder the red and black wire back on and refit it in reverse order,and add a bit of nut lock to be safe regards mark
-
Hi all the weather is looking great for some all day flying 9 am till 6 pm Wind NNW 6MPH fill er up and away we go Ill text you all mark
-
Hi I have put some vids on have a look viewtopic.php?f=17&t=5454 cheers mark
-
Hi Norris have a look at this viewtopic.php?f=17&t=5454 see you soon mark
-
Hi to you all here is some vids of the fly-in [youtubevideo] [/youtubevideo][youtubevideo] [/youtubevideo]All comments welcome some more to come later cheers mark
-
HI to you all again it was well worth traveling 240 miles to do a weekends flying with like minded and genuine people Us northern buggers just might turn up to a few more fly-ins LOL ! Its nice to see some scenery that's not flat as a pancake I have some video and photo's of the site and surrounding area from 1800ft ( will up load later) see you all soon MARK
-
Hi Tonyp This is me setting up my rad The angle is set up wright for me at that angle but I did pull the shoulder straps in so they were closer to me , the top and bottom fastenings have about 1 inch of slack in them . If you stand still and put full throttle on full it dose twist with the torque Hope this helps i have put new image in my gallery
-
Hi all I tried this out its a Hitachi (DZ-HV575E) the light was poo so just have a look cheers mark if this don't work help please thanks in advance Mark
-
at video point 4.49 it jumps to 4.51 it jumps its has been edited
-
Hi Tom are those mounts for the 3 blade macro prop or the two blade pluse R2R prop regards mark